[Announce] Libgcrypt 1.8.0 released

Werner Koch wk at gnupg.org
Tue Jul 18 22:43:19 CEST 2017


Hello!

The GnuPG Project is pleased to announce the availability of Libgcrypt
version 1.8.0.  This is a new stable version of Libgcrypt with full API
and ABI compatibility to the 1.7 series.  Its main features are support
Blake-2, XTS mode, an improved RNG, and performance improvements for the
ARM architecture.

Libgcrypt is a general purpose library of cryptographic building blocks.
It is originally based on code used by GnuPG.  It does not provide any
implementation of OpenPGP or other protocols.  Thorough understanding of
applied cryptography is required to use Libgcrypt.


Noteworthy changes between version 1.7.0 and 1.8.0:
===================================================

 * New interfaces:

   - New cipher mode XTS
   - New hash function Blake-2
   - New function gcry_mpi_point_copy.
   - New function gcry_get_config.
   - GCRYCTL_REINIT_SYSCALL_CLAMP allows to init nPth after Libgcrypt.
   - New gobal configuration file /etc/gcrypt/random.conf.

 * Extended interfaces:

   - GCRYCTL_PRINT_CONFIG does now also print build information for
     libgpg-error and the used compiler version.
   - GCRY_CIPHER_MODE_CFB8 is now supported.
   - Add Stribog OIDs.  [also in 1.7.4]

 * Performance:

   - A jitter based entropy collector is now used in addition to the
     other entropy collectors.
   - Optimized gcry_md_hash_buffers for SHA-256 and SHA-512.
   - More ARMv8/AArch32 improvements for AES, GCM, SHA-256, and SHA-1.
     [also in 1.7.4]
   - Add ARMv8/AArch32 assembly implementation for Twofish and
     Camellia.  [also in 1.7.4]
   - Add bulk processing implementation for ARMv8/AArch32.
     [also in 1.7.4]
   - Improve the DRBG performance and sync the code with the Linux
     version.  [also in 1.7.4]

 * Internal changes:

   - Libgpg-error 1.25 is now required.  This avoids stalling of nPth
     threads due to contention on internal Libgcrypt locks (e.g. the
     random pool lock).
   - The system call clamp of libgpg-error is now used to wrap the
     blocking read of /dev/random.  This allows other nPth threads to
     run while Libgcrypt is gathering entropy.
   - When secure memory is requested by the MPI functions or by
     gcry_xmalloc_secure, they do not anymore lead to a fatal error if
     the secure memory pool is used up.  Instead new pools are
     allocated as needed.  These new pools are not protected against
     being swapped out (mlock can't be used).  However, these days
     this is considered a minor issue and can easily be mitigated by
     using encrypted swap space.  [also in 1.7.4]

 * Bug fixes:

   - Fix AES CTR self-check detected failure in the SSSE3 based
     implementation.  [also in 1.7.6]
   - Remove gratuitous select before the getrandom syscall.
     [also in 1.7.6]
   - Fix regression in mlock detection.  [bug#2870] [also in 1.7.5]
   - Fix GOST 28147 CryptoPro-B S-box.   [also in 1.7.4]
   - Fix error code handling of mlock calls.  [also in 1.7.4]
   - Fix possible timing attack on EdDSA session key. [also in 1.7.7]
   - Fix long standing bug in secure memory implementation which could
     lead to a segv on free. [bug#3027] [also in 1.7.7]
   - Mitigate a flush+reload side-channel attack on RSA secret keys
     dubbed "Sliding right into disaster".  For details see
     <https://eprint.iacr.org/2017/627>.  [CVE-2017-7526] [also in 1.7.8]

For a list of interface changes relative to the 1.7.0 release see [4].


Download
========

Source code is hosted at the GnuPG FTP server and its mirrors as listed
at <https://gnupg.org/download/mirrors.html>.  On the primary server
the source tarball and its digital signature are:

 ftp://ftp.gnupg.org/gcrypt/libgcrypt/libgcrypt-1.8.0.tar.bz2
 ftp://ftp.gnupg.org/gcrypt/libgcrypt/libgcrypt-1.8.0.tar.bz2.sig

That file is bzip2 compressed.  A gzip compressed version is here:

 ftp://ftp.gnupg.org/gcrypt/libgcrypt/libgcrypt-1.8.0.tar.gz
 ftp://ftp.gnupg.org/gcrypt/libgcrypt/libgcrypt-1.8.0.tar.gz.sig

The same files are also available via HTTP:

 https://gnupg.org/ftp/gcrypt/libgcrypt/libgcrypt-1.8.0.tar.bz2
 https://gnupg.org/ftp/gcrypt/libgcrypt/libgcrypt-1.8.0tar.bz2.sig
 https://gnupg.org/ftp/gcrypt/libgcrypt/libgcrypt-1.8.0.tar.gz
 https://gnupg.org/ftp/gcrypt/libgcrypt/libgcrypt-1.8.0.tar.gz.sig

In order to check that the version of Libgcrypt you downloaded is an
original and unmodified file please follow the instructions found at
<https://gnupg.org/download/integrity_check.html>.  In short, you may
use one of the following methods:

 - Check the supplied OpenPGP signature.  For example to check the
   signature of the file libgcrypt-1.8.0.tar.bz2 you would use this
   command:

     gpg --verify libgcrypt-1.8.0.tar.bz2.sig libgcrypt-1.8.0.tar.bz2

   This checks whether the signature file matches the source file.
   You should see a message indicating that the signature is good and
   made by one or more of the release signing keys.  Make sure that
   this is a valid key, either by matching the shown fingerprint
   against a trustworthy list of valid release signing keys or by
   checking that the key has been signed by trustworthy other keys.
   See the end of this mail for information on the signing keys.

 - If you are not able to use an existing version of GnuPG, you have
   to verify the SHA-1 checksum.  On Unix systems the command to do
   this is either "sha1sum" or "shasum".  Assuming you downloaded the
   file libgcrypt-1.8.0.tar.bz2, you run the command like this:

     sha1sum libgcrypt-1.8.0.tar.bz2

   and check that the output matches the first line from the
   this list:

b4ffb20369f2ab8249d5cc0fb8b3b31371f6b112  libgcrypt-1.8.0.tar.bz2
1c5f57008e9d0944a3d0ecec894205dd1a272752  libgcrypt-1.8.0.tar.gz

   You should also verify that the checksums above are authentic by
   matching them with copies of this announcement.  Those copies can be
   found at other mailing lists, web sites, and search engines.


Copying
=======

Libgcrypt is distributed under the terms of the GNU Lesser General
Public License (LGPLv2.1+).  The helper programs as well as the
documentation are distributed under the terms of the GNU General Public
License (GPLv2+).  The file LICENSES has notices about contributions
that require that these additional notices are distributed.


Support
=======

For help on developing with Libgcrypt you should read the included
manual and optional ask on the gcrypt-devel mailing list [1].  A
listing with commercial support offers for Libgcrypt and related
software is available at the GnuPG web site [2].

If you are a developer and you may need a certain feature for your
project, please do not hesitate to bring it to the gcrypt-devel
mailing list for discussion.

Maintenance and development of Libgcrypt is mostly financed by
donations; see <https://gnupg.org/donate/>.  We currently employ
4 full-time developers, one part-timer, and one contractor to work on
GnuPG and closely related software like Libgcrypt.


Thanks
======

We like to thank all the people who helped with this release, be it
testing, coding, translating, suggesting, auditing, administering the
servers, spreading the word, and answering questions on the mailing
lists.  Also many thanks to all our donors [3].  Special thanks to
Stephan Müller for his entropy generator based on timing jitter.


Happy hacking,

  The GnuPG Team



[1] https://lists.gnupg.org/mailman/listinfo/gcrypt-devel
[2] https://www.gnupg.org/service.html
[3] https://gnupg.org/donate/kudos.html
[4] Interface changes relative to the 1.7.0 release:
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    gcry_get_config                 NEW function.
    gcry_mpi_point_copy             NEW function.
    GCRYCTL_REINIT_SYSCALL_CLAMP    NEW macro.
    GCRY_MD_BLAKE2B_512             NEW constant.
    GCRY_MD_BLAKE2B_384             NEW constant.
    GCRY_MD_BLAKE2B_256             NEW constant.
    GCRY_MD_BLAKE2B_160             NEW constant.
    GCRY_MD_BLAKE2S_256             NEW constant.
    GCRY_MD_BLAKE2S_224             NEW constant.
    GCRY_MD_BLAKE2S_160             NEW constant.
    GCRY_MD_BLAKE2S_128             NEW constant.
    GCRY_CIPHER_MODE_XTS            NEW constant.
    gcry_md_info                    DEPRECATED.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

p.s.
This is an announcement only mailing list.  Please send replies only to
the gcrypt-devel 'at' gnupg.org mailing list.

p.p.s
List of Release Signing Keys:

To guarantee that a downloaded GnuPG version has not been tampered by
malicious entities we provide signature files for all tarballs and
binary versions.  The keys are also signed by the long term keys of
their respective owners.  Current releases are signed by one or more
of these five keys:

  2048R/4F25E3B6 2011-01-12 [expires: 2019-12-31]
  Key fingerprint = D869 2123 C406 5DEA 5E0F  3AB5 249B 39D2 4F25 E3B6
  Werner Koch (dist sig)

  rsa2048/E0856959 2014-10-29 [expires: 2019-12-31]
  Key fingerprint = 46CC 7308 65BB 5C78 EBAB  ADCF 0437 6F3E E085 6959
  David Shaw (GnuPG Release Signing Key) <dshaw 'at' jabberwocky.com>

  rsa2048/33BD3F06 2014-10-29 [expires: 2016-10-28]
  Key fingerprint = 031E C253 6E58 0D8E A286  A9F2 2071 B08A 33BD 3F06
  NIIBE Yutaka (GnuPG Release Key) <gniibe 'at' fsij.org>

  rsa2048/7EFD60D9 2014-10-19 [expires: 2020-12-31]
  Key fingerprint = D238 EA65 D64C 67ED 4C30  73F2 8A86 1B1C 7EFD 60D9
  Werner Koch (Release Signing Key)

  rsa3072/4B092E28 2017-03-17 [expires: 2027-03-15]
  Key fingerprint = 5B80 C575 4298 F0CB 55D8  ED6A BCEF 7E29 4B09 2E28
  Andre Heinecke (Release Signing Key)

You may retrieve these keys from a keyserver using this command

  gpg --keyserver hkp://keys.gnupg.net --recv-keys  \
                  249B39D24F25E3B6 04376F3EE0856959 \
                  2071B08A33BD3F06 8A861B1C7EFD60D9 BCEF7E294B092E28

The keys are also available at https://gnupg.org/signature_key.html and
in any recently released GnuPG tarball in the file g10/distsigkey.gpg .
Note that this mail has been signed by a different key.

--
Die Gedanken sind frei.  Ausnahmen regelt ein Bundesgesetz.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 194 bytes
Desc: not available
URL: </pipermail/attachments/20170718/e4556536/attachment.sig>
-------------- next part --------------
_______________________________________________
Gnupg-announce mailing list
Gnupg-announce at gnupg.org
http://lists.gnupg.org/mailman/listinfo/gnupg-announce


More information about the Gnupg-devel mailing list